Water pump without power
This is not a joke or a joke. The water pump, which will be discussed, does not really need electricity, no gasoline, or anything else. He does not draw energy from the ether and does not catch free energy. With all this, he is able to raise a column of water several times higher than the initial pressure. No deception or cheating - ordinary physics and nothing more. Of course, if you see such a pump for the first time, then, as I might think, this is nonsense ... Same as the invention of a perpetuum mobile ... But no, everything is much simpler and fairly easy to explain. This is a 100% working model of a water pump, repeated by more than one craftsman.In this case, the design looks like a straight pipe with various valves and taps,with a branch in the center of a thicker pipe diameter. The thickest part is a buffer or receiver for storing and stabilizing pressure. Left and right mounted inlet and outlet ball valves. I will consider the pump from right to left. Since the right side is the entrance to the water, and the left is the exit. In general, we understand that water is supplied to the right-hand ball valve. Next comes the tee. Tee, splits threads. Up feeds to a valve that closes with sufficient pressure. A direct stream is fed to the valve, which opens when the desired pressure is reached. Then, the tee goes again to the receiver and is already at the exit. And, another manometer, but it may not be, is not so important.Valve.Build the buffer receiver.The final part of the pump.Almost finished sample.Add a pressure gauge to measure pressure in operation.The water pump with pressure gauge is ready for testing.Put the receiver vertically, the brass valve should be outdoors.And the pump, flipping the valves, begins to pump water above the level of the fence. Much higher level of water intake at the beginning of the pipe.
Making a water pumpSo, first, I will describe how the pump is arranged, and then its operation principle and operation in real conditions .
Construction with a descriptionThis is how it looks. Everything is made of PVC pipes.
DetailsAll parts are laid out before assembly. I use PVC pipes, they are glued to glue, but polypropylene is quite possible.
BuildI assemble. The second valve is in the middle and looks a little different. The difference between these two valves is that initially the brass valve will always be open,and the PVC valve is always closed initially.
Pump testsThe time has come to install and test the pump. I want to make a little reservation and say that the pump is not exactly pumping water, but rather increases its pressure. I mean that the pump needs an initialpressure. To do this, we set the pump in a small stream. We connect a long pipe of several meters (this is a prerequisite) and we will take water from a small elevation. As a result, the water will flow to the pump itself.
The principle of the water pumpIt all seems truly amazing and incredible, but there is no secret. Such water pumps are also called hydrostatic and they work like this: When water is supplied,then it immediately rushes to the open valve.
Salt Dough Valentines
This cake is an unearthly delicacy. And you don’t even need to bake it
DIY Flower Candy
Delicious recipes - cook with love
Robots-dogs have learned to open and hold the door themselves
Angel Embroidery - Christmas Tree Toy
Oriental Bonsai Wire and Yarn Wood