A laptop is not only an expensive technique, but also quite capricious. To protect it you need a special "clothes", that is, a cover. It will protect your device from dust, scratches, temperature effects and other troubles. Many women are able to make a wide variety of gifts with their own hands. But not all men are able to appreciate their craftsmanship and are quite skeptical about such things. But we are sure that a laptop case, made with love by your own hands, will not leave indifferent even the most inveterate skeptic. You can, of course, also buy a case. But to make it yourself from a variety of materials is much nicer. Today we will sew a cover-envelope made of fabric. For the manufacture of such necessary things were used: - black drape; - colored cotton fabric for the lining; - gray drape piece for the pocket; - velcro tape for fastener; - shred of red felt for decoration.Work stages: 1. We measure the dimensions of our laptop.To do this, fold the fabric (black drape) in half and draw a rectangle of the main part in accordance with the measurements taken. For the valve on the lower layer of fabric, add another 8-10 cm above. Give an allowance of 1-1.5 cm on the sides and 3-4 cm in the upper and lower parts. We cut out the resulting workpiece.2. From a lining fabric, cut a rectangle of the same size, but without allowances at the top and bottom. We cut out a pocket from a gray drape. Its width is equal to the width of the main part, height at your discretion. The top of the pocket can be bent or processed with zigzag scissors.3. We fasten a pocket to the front wall of our case. Previously, you can make a fold in the bottom of the pocket to give it a larger volume.4.We fold the lining fabric and the main part together with the wrong sides, wrap the drape on the lining at the top and bottom for a 3-4 cm hem. We stretch the sides by 0.5 cm, the upper and lower parts - by 2-3 cm, respectively.5. Bend the resulting "sandwich" lining outward and otstaskivayem obliquely the lower corners of our envelope. Cut corners, leaving an allowance of 0.5 cm.6. Sew on the flap and the front wall of the envelope pieces of Velcro tape.7. We fold the envelope lining the inside and we trim the side parts.8. We cut out the strips of the bias from the lining fabric, each 3-4 cm wide, and process the right and left edges of the laptop case with them.9.It remains to attach a felt-adornment of felt to the valve with hot-melt (you can also attach it nicely if your assistant - a sewing machine - is capable of this operation).The original cover for the laptop is ready. It is sewn by hand, therefore, as an exclusive thing, it will be especially for the liking of a loved one and friends as a gift.By design and The cover will not yield to the beauty of the finished, bought in a special store.
Topiary made of plastic bottles with your own hands
Satellite TV Benefits
Peat Cheese Curd
Simple color music on LEDs