How easy it is to fix a hand power tool
There is a great need to fix the bulgark in a stationary state. Say sharpen the drill if there is no stationary sandpaper on hand. I will show how to make an incredibly simple stand on which it will be possible to fix not only the grinder, but also other tools, such as a drill, a Dremel, a building hair dryer, and so on.It will not be enough to have one such plate, as it is too light, so we will cut out another one. We apply on top and draw a marker along the contour.Cut it out with a hacksaw or jigsaw.We fasten the screws with four sides,pre-drilled holes.Flip the bolts down so they don't spoil the view.We put a grinder in the middle, which needs to be fixed motionless.And mark the places for future fixtures.We need two more of these clamps. Such pipes are fixed, there are plenty of them in construction stores of absolutely any diameter.Drill a hole for plastic dowels.We insert them into the holes with a hammer.Screw the screw stands. Screw clamps.
Making a stand for a power toolSawing rectangular piece of chipboard with dimensions larger than your tool.
Mini fountain do-it-yourself
The most lazy dumplings with cottage cheese
Where to order logo design for a construction company and a restaurant site
How to make a Christmas tree from paper
Christmas tree of twine
DIY Solder Paste